Extreme Networks ExtremeWare XOS Command Reference Manual page 251

Local Filename Character Restrictions. This section provides information about the characters supported
by the switch for local filenames.
When specifying a local filename, the switch permits only the following characters:
Alphabetical letters, upper case and lower case (A-Z, a-z)
●
Numerals (0-9)
●
Period ( . )
●
Dash ( - )
●
Underscore ( _ )
●
When naming a local or remote file, remember the requirements listed above.
Modular Switches Only. This command also replicates the action from the primary MSM to the backup
MSM. For example, if you rename a file on the primary MSM, the same file on the backup MSM is
renamed.
For the option, this command can now move files between the external memory card and
memorycard
the switch. If you use the
just renames a file on the external memory card.
BlackDiamond 10K Switch Only. In ExtremeWare 10.1, this command was available only on the primary
MSM. For example, if you renamed a file on the primary MSM, the same file on the backup MSM was
not renamed.
Example
The following command renames the configuration file named Testb91.cfg to Activeb91.cfg:
mv Testb91.cfg Activeb91.cfg
On a modular switch with an external memory card installed, the following command moves the
configuration file named test1.cfg from the switch to the external memory card:
mv test1.cfg memorycard test1.cfg
On a modular switch, if you do not change the name of the configuration file, you can also use the
following command to move the configuration file test1.cfg from the switch to the external memory
card:
mv test1.cfg memorycard
On a modular switch with an external memory card installed, the following command moves the policy
file named bgp.pol from the memorycard to the switch:
mv memorycard bgp.pol bgp.pol
History
This command was first available in ExtremeWare XOS 10.1.
Support for replicating information from the primary MSM to the backup MSM was introduced in
ExtremeWare XOS 11.0.
ExtremeWare XOS 11.3 Command Reference
option for both the
memorycard
and the
old-name new-name
mv
, this command
251