disable stpd rapid-root-failover
disable stpd rapid-root-failover
disable stpd <stpd_name> rapid-root-failover
Description
Disables rapid root failover for STP recovery times.
Syntax Description
stpd_name
Specifies an STPD name on the switch.
Default
Disabled.
Usage Guidelines
After you have created the STPD with a unique name, the keyword
is optional.
stpd
To view the status of rapid root failover on the switch, use the
command. The
show stpd
show stpd
command displays information about the STPD configuration on the switch including the enable/
disable state for rapid root failover.
Example
The following command disables rapid root fail over on STPD Backbone_st:
disable stpd backbone_st rapid-root-failover
History
This command was available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
967
ExtremeWare XOS 11.3 Command Reference