Extreme Networks ExtremeWare XOS Command Reference Manual page 256

Commands for Managing the ExtremeWare XOS Software
Dash ( - )
●
Underscore ( _ )
●
When naming a local or remote file, remember the requirements listed above.
Modular Switches Only. This command also replicates the action from the primary MSM to the backup
MSM. For example, if you delete a file on the primary MSM, the same file on the backup MSM is
deleted.
For the
memorycard
You can use the * wildcard to delete all of a particular file type from the external memory card.
BlackDiamond 10K Switch Only. In ExtremeWare 10.1, this command was available only on the primary
MSM. For example, if you deleted a file on the primary MSM, the same file on the backup MSM was
not deleted.
Example
The following command removes the configuration file named Activeb91.cfg from the system:
rm Activeb91.cfg
On a modular switch with an external memory card installed, the following command removes the
policy file named
rm memorycard test.pol
On a modular switch with an external memory card installed, the following command removes all of
the configuration files from the external memory card:
rm memorycard *.cfg
History
This command was first available in ExtremeWare XOS 10.1.
Support for replicating information from the primary MSM to the backup MSM was introduced in
ExtremeWare XOS 11.0.
The
memorycard
Platform Availability
This command is available on all platforms.
256
option, this command removes/deletes an existing file on the card.
from the external memory card:
test.pol
option was added in ExtremeWare XOS 11.1.
ExtremeWare XOS 11.3 Command Reference