Extreme Networks ExtremeWare XOS Command Reference Manual page 188

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

Commands for Managing the Switch

The following command displays the status of the node, the priority of the node, and the general health

of the system:

The following is sample output from this command:

-----------------------------------------------

If you specify the

tabular format.

Node MSM-A information:

Node Priority: 0

Node MSM-B information:

Node Priority: 0

This command was first available in an ExtremeWare XOS 10.1.

Platform Availability

This command is available only on modular switches.

option, the same information is displayed on a per node basis rather than in a

ExtremeWare XOS 11.3 Command Reference

Extremeware xos 11.3