Show Lldp - Extreme Networks ExtremeWare XOS Command Reference Manual

LLDP Commands

show lldp

show lldp {port [all | <port_list>]} {detailed}
Description
Displays LLDP configuration information for the specified port or ports. Use the
display the configured VLANs on the port and the enabled VLAN-specific TLVs.
Syntax Description
all
port_list
detailed
Default
N/A.
Usage Guidelines
Use the detailed variable to display information regarding configured VLANs on the ports and any
enabled VLAN-specific TLVs.
Example
The following example displays LLDP configuration information for the switch:
# show lldp
LLDP transmit interval
LLDP transmit hold multiplier
LLDP transmit delay
LLDP SNMP notification interval : 5 seconds
LLDP reinitialize delay
LLDP Port Configuration:
Port Rx
Mode
============================================================================
1:1 Enabled
2:2 Enabled
=============================================================================
LLDP Flags : (P) Port Description, (N) System Name, (D) System Description
802.1 Flags: (P) Port VLAN ID, (p) Port & Protocol VLAN ID, (N) VLAN Name
802.3 Flags: (M) MAC/PHY Configuration/Status, (P) Power via MDI
404
Specifies all ports on the switch.
Specifies one or more ports or slots and ports.
Shows information on the configured VLANs on the port.
: 30 seconds
: 4
: 2 seconds
: 2 seconds
Tx SNMP
Mode Notification
Enabled Disabled
Enabled Disabled
(C) System Capabilities, (M) Mgmt Address
(L) Link Aggregation, (F) Frame Size
(used TTL = 120 seconds)
Optional enabled transmit TLVs
LLDP 802.1 802.3
PNDCM PpN- M-LF
--D-- ---- ----
keyword to
detailed
ExtremeWare XOS 11.3 Command Reference