Configure Sntp-Client Update-Interval - Extreme Networks ExtremeWare XOS Command Reference Manual
Version 11.3
Hide thumbs
Also See for ExtremeWare XOS:
- Command reference manual (2024 pages) ,
- Manual (698 pages) ,
- Command reference manual (970 pages)
Table of Contents
Advertisement
Commands for Managing the Switch
configure sntp-client update-interval
configure sntp-client update-interval <update-interval>
Description
Configures the interval between polls for time information from SNTP servers.
Syntax Description
update-interval
Specifies an interval in seconds.
Default
64 seconds.
Usage Guidelines
None.
Example
The following command configures the interval timer:
configure sntp-client update-interval 30
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
158
ExtremeWare XOS 11.3 Command Reference
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare XOS and is the answer not in the manual?