Show Ports Packet - Extreme Networks ExtremeWare XOS Command Reference Manual

show ports packet

show ports {mgmt | <port_list>} packet {no-refresh}
Description
Displays a histogram of packet statistics.
Syntax Description
mgmt
port_list
no-refresh
Default
Real-time statistics.
Usage Guidelines
If you do not specify a port number or range of ports, the system displays information for all ports; if
you specify the
no-refresh
the command. To clear the counters, use the
This status information may be useful for your technical support representative if you have a network
problem.
The following packet statistics are displayed:
Port number
●
Link state
●
Packet size
●
Example
The following command displays packet statistics for slot 1, port 1, slot 2, port 1, and slot 5, ports 1
through 8 on a modular switch:
show ports 1:1, 2:1, 5:1-5:8 packet
Following is sample output from this command:
Port Link
State 0-64
================================================================================
1:1 A 0
2:1 R 0
5:1 R 0
5:2 R 0
5:3 R 0
ExtremeWare XOS 11.3 Command Reference
Specifies the management port.
Specifies one or more ports or slots and ports.
Specifies a static snapshot of data.
parameter, the system displays a snapshot of the data at the time you issue
clear counters ports
Packet Sizes
65-127 128-255 256-511
0 0
0 0
0 0
0 0
0 0
command.
512-1023 1024-1518
0 0
0 0
0 0
0 0
0 0
show ports packet
Jumbo
0 0
0 0
0 0
0 0
0 0
361