Extreme Networks ExtremeWare XOS Command Reference Manual page 342

Commands for Configuring Slots and Ports on a Switch
If this number is lower than the number displayed for the Actor Key, the partner system is the
■
controlling partner in the LAG.
Agg Count
●
Identifies the number of ports added to the aggregator for that LAG.
■
Example
The following command displays the LACP LAGs on the switch:
show lacp
The following is sample output from this command on a modular switch:
LACP Up
LACP Enabled
System MAC
LACP PDUs dropped on non-LACP ports : 0
Lag Actor
Sys-Pri
--------------------------------------------------------------------------------
2:1
4:5
4:9
History
This command was first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms.
342
Actor Partner
Key MAC
90 0x07d1 00:01:30:f9:9c:30
100 0x0fa5 00:01:30:f9:9c:30
677 0x0fa9 00:01:30:f9:9c:30
: Yes
: Yes
: 00:04:96:10:33:60
Partner Partner
Sys-Pri Key
601 0x1391
321 0x1f47
87 0x0fa9
Agg
Count
2
16
8
ExtremeWare XOS 11.3 Command Reference