Commands for Configuring Slots and Ports on a Switch
clear lacp counters
clear lacp counters
Description
Clears the counters associated with Link Aggregations Control Protocol (LACP).
Syntax Description
This command has no parameters or variables.
Default
N/A
Usage Guidelines
This command clears the following counters for LACP; it sets these counters back to 0 for every LACP
port on the device:
LACP PDUs dropped on non_LACP ports
●
Stats
●
Rx - Accepted
■
Rx - Dropped due to error in verifying PDU
■
Rx - Dropped due to LACP not being up on this port
■
Rx - Dropped due to matching own MAC
■
Tx - Sent Successfully
■
Tx - Transmit error
■
Example
The following command clears the LACP counters on all ports:
clear lacp counters
History
This command was first available in ExtremeWare XOS 11.3.
Platform Availability
This command is available on all platforms.
282
ExtremeWare XOS 11.3 Command Reference