Extreme Networks ExtremeWare XOS Command Reference Manual page 725

Example
The display varies depending on your platform.
BlackDiamond 8800 family of switches and Summit X450 switch only. No arguments are available on the
BlackDiamond 8800 family of switches or the Summit X450 switch for this command. Following is
sample output from the
show qosprofile
QP1 Weight =
QP2 Weight =
QP8 Weight =
BlackDiamond 10K switch only. You can display either the ingress or the egress QoS profiles on the
BlackDiamond 10K switch. The number of available ingress QoS profiles differs depending on the
module you are displaying.
The following shows sample output for the
the egress QoS profiles:
Port: 1:1
QP1 MinBw=
QP2 MinBw=
QP3 MinBw=
QP4 MinBw=
QP5 MinBw=
QP6 MinBw=
QP7 MinBw=
QP8 MinBw=
The following shows sample output for the
displays the ingress QoS profiles on a 10 G port:
Port: 8:1
IQP1 MinBw=
IQP2 MinBw=
IQP3 MinBw=
IQP4 MinBw=
IQP5 MinBw=
IQP6 MinBw=
IQP7 MinBw=
IQP8 MinBw=
The following shows sample output for the
displays the ingress QoS profiles on a 1 G port:
Port: 2:1
IQP1 MinBw=
IQP2 MinBw=
History
This command was first available in ExtremeWare XOS 10.1.
The ingress information was added in ExtremeWare XOS 11.0.
ExtremeWare XOS 11.3 Command Reference
command:
1 Max Buffer Percent = 100
4 Max Buffer Percent =
1 Max Buffer Percent = 100
show qosprofile ports 1:1
0% MaxBw=100% Pri=1
0% MaxBw=100% Pri=2
0% MaxBw=100% Pri=3
0% MaxBw=100% Pri=4
0% MaxBw=100% Pri=5
0% MaxBw=100% Pri=6
0% MaxBw=100% Pri=7
0% MaxBw=100% Pri=8
show qosprofile ingress ports 8:1
0% MaxBw=100% Pri=1
0% MaxBw=100% Pri=2
0% MaxBw=100% Pri=3
0% MaxBw=100% Pri=4
0% MaxBw=100% Pri=5
0% MaxBw=100% Pri=6
0% MaxBw=100% Pri=7
0% MaxBw=100% Pri=8
show qosprofile ingress ports 2:1
0% MaxBw=100% Pri=1
0% MaxBw=100% Pri=2
90
command, which displays
show qosprofile
command, which
command, which
725