Create Vlan - Extreme Networks ExtremeWare XOS Command Reference Manual

VLAN Commands

create vlan

create vlan <vlan_name> {vr <vr-name>}
Description
Creates a named VLAN.
Syntax Description
vlan_name
vr
vr-name
Default
A VLAN named Default exists on all new or initialized Extreme switches:
It initially contains all ports on a new or initialized switch, except for the management port(s), if
●
there are any.
It has an 802.1Q tag of 1.
●
The default VLAN is untagged on all ports.
●
It uses protocol filter
●
A VLAN named Mgmt exists on switches that have management modules or management ports.
It initially contains the management port(s) the switch.
●
It is assigned the next available internal VLANid as an 802.1Q tag.
●
If you do not specify the virtual router, the VLAN is created in the current virtual router.
Usage Guidelines
A newly-created VLAN has no member ports, is untagged, and uses protocol filter
configure it otherwise. Use the various
needs.
Internal VLANids are assigned automatically using the next available VLANid starting from the high
end (4094) of the range.
Each VLAN name can be up to 32 standard alphanumeric characters, but must begin with an
alphabetical letter. Quotation marks can be used to enclose a VLAN name that does not begin with an
alphabetical character, or that contains a space, comma, or other special character.
604
Specifies a VLAN name (up to 32 characters).
Specifies a virtual router.
Specifies in which virtual router to create the VLAN.
NOTE: On the BlackDiamond 8800 family of switches and the Summit X450
switch, all VLANs are created in VR-Default and cannot be moved.
.
any
configure vlan
commands to configure the VLAN to your
ExtremeWare XOS 11.3 Command Reference
until you
any