Show Vman - Extreme Networks ExtremeWare XOS Command Reference Manual

VLAN Commands

show vman

show vman {<vlan_name> | etherType | detail}
Description
Displays VMAN information including configuration and Ethertype.
Syntax Description
vlan_name
etherType
detail
Default
Summary information for all VMANs on the device.
Usage Guidelines
None.
Example
The following is an example of the display from the
-------------------------------------------------------------------------------
Name
-------------------------------------------------------------------------------
peggy
t
-------------------------------------------------------------------------------
Flags : (C) EAPS Control vlan, (E) ESRP Enabled, (f) IP Forwarding Enabled,
(i) ISIS Enabled, (I) IP Forwarding lpm-routing Enabled, (L) Loopback
Enabled, (m) IPmc Forwarding Enabled,
(n) IP Multinetting Enabled, (N) Network LogIn vlan,
(o) OSPF Enabled, (p) PIM Enabled,
(P) EAPS protected vlan, (r) RIP Enabled, (T) Member of STP Domain,
(v) VRRP Enabled
Total number of Vlan(s) : 6
The following is an example of the display from the
VLAN Interface with name test created by user
Tagging:Untagged (Internal tag 4090)
Priority:
Virtual router: VR-Default
Primary IP
620
Specifies information is displayed for particular VMAN.
Specifies that Ethertype information is displayed for each VMAN.
Specifies all information is displayed for each VMAN.
VID Protocol Addr
100 10.10.255.3 /24
802.1P Priority 0
: 10.10.255.3/24
command:
show vman
Flags Proto Ports
Active router
/Total
f-----m-------- ANY
show vman <vlan_name>
ExtremeWare XOS 11.3 Command Reference
Virtual
0 /0 VR-Defaul
command: