Show Netlogin - Extreme Networks ExtremeWare XOS Command Reference Manual

Network Login Commands

show netlogin

show netlogin {port <portlist> vlan <vlan_name>} {dot1x {detail}} {mac}
{web-based}
Description
Shows status information for Network Login.
Syntax Description
portlist
vlan_name
dot1x
mac
web-based
detail
Default
N/A.
Usage Guidelines
The information reported by this command is the following:
Whether network login is enabled or disabled.
●
The base-URL.
●
The default redirect page.
●
The logout privileges setting.
●
The netlogin session-refresh setting and time.
●
The MAC and IP address of supplicants.
●
The type of authentication, 802.1x, MAC-based, or HTTP (web-based).
●
The guest VLAN configurations, if applicable.
●
If you do not specify the authentication type, all will be displayed.
Example
The following command shows the summary network login information:
show netlogin
870
Specifies one or more ports or slots and ports.
Specifies the name of a VLAN.
Specifies 802.1x information.
Specifies MAC-based information.
Specifies web-based information.
Shows detailed information.
ExtremeWare XOS 11.3 Command Reference