Unconfigure Inline-Power Operator-Limit Ports - Extreme Networks ExtremeWare XOS Command Reference Manual

Version 11.3

Hide thumbs Also See for ExtremeWare XOS:

Table of Contents

Power Over Ethernet Commands

unconfigure inline-power operator-limit ports

unconfigure inline-power operator-limit ports [all |<port_list>]

Unconfigures the PoE operator limit setting and resets the power limit allowed for PDs connected to the

specified ports to the default value of 15400 mW.

Syntax Description

Usage Guidelines

This command unconfigures any previously configured operator limit for the specified ports. It resets

the maximum power that any PD can draw to 15400 mW.

The following command resets the limit on ports 3 to 6 of slot 5 to the default value of 15400 mW:

unconfigure inline-power operator-limit ports 5:3-5:6

This command was first available in ExtremeWare XOS 11.1.

Platform Availability

This command is available only on the G48P module installed in the BlackDiamond 8800 family of

Specifies all ports.

Specifies one or more slots and ports. May be in the form 2:*, 2:5, 2:6-2:8.

ExtremeWare XOS 11.3 Command Reference

Extremeware xos 11.3