Extreme Networks ExtremeWare XOS Command Reference Manual page 405

The following example includes detailed information on the LLDP configuration for port 1:
# show lldp port 1 detailed
LLDP transmit interval
LLDP transmit hold multiplier
LLDP transmit delay
LLDP SNMP notification interval : 5 seconds
LLDP reinitialize delay
LLDP Port Configuration:
Port Rx Tx
Mode Mode
============================================================================
1 Enabled Enabled
VLAN: Default
VLAN: voice
=============================================================================
LLDP Flags : (P) Port Description, (N) System Name, (D) System Description
(C) System Capabilities, (M) Mgmt Address
802.1 Flags: (P) Port VLAN ID, (p) Port & Protocol VLAN ID, (N) VLAN Name
802.3 Flags: (M) MAC/PHY Configuration/Status, (P) Power via MDI
(L) Link Aggregation, (F) Frame Size
History
This command was first available in ExtremeWare XOS 11.2.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
: 30 seconds
: 4 (used TTL = 120 seconds)
: 2 seconds
: 2 seconds
SNMP Optional enabled transmit TLVs
Notification LLDP
Disabled -ND--
-----
-----
802.1 802.3
--N- ----
---- ----
--N- ----
show lldp
405