Configure Netlogin Dot1X Timers - Extreme Networks ExtremeWare XOS Command Reference Manual

Network Login Commands

configure netlogin dot1x timers

configure netlogin dot1x timers [{server-timeout <server_timeout>} {quiet-
period <quiet_period>} {reauth-period <reauth_period>} {supp-resp-timeout
<supp_resp_timeout>}]
Description
Configures the 802.1x timers for Network Login.
Syntax Description
server-timeout
quiet-period
reauth-period
supp-resp-timeout
Default
The defaults are as follows:
server-timeout—30 seconds.
●
quiet-period—60 seconds.
●
reauth-period—3600 seconds.
●
supp-resp-timeout—30 seconds.
●
Usage Guidelines
None.
Example
The following example changes the 802.1x server-timeout to 10 seconds:
configure netlogin dot1x timers server-timeout 10
History
This command was first available in ExtremeWare XOS 11.1.
Platform Availability
This command is available on all platforms.
842
Specifies the timeout period for a response from the RADIUS server.
Specifies the time for which the switch will not attempt to communicate with
the supplicant after authentication has failed.
Specifies time after which the switch will attempt to re-authenticate an
authenticated supplicant.
Specifies the time for which the switch will wait for a response from the
supplicant.
ExtremeWare XOS 11.3 Command Reference