Configure Ports Auto On - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Configuring Slots and Ports on a Switch

configure ports auto on

configure ports <port_list> auto on
Description
Enables autonegotiation for the particular port type.
Syntax Description
port_list Specifies one or more ports or slots and ports.
Default
Auto on for 1 Gbps ports.
Auto off for 10 Gbps ports.
Usage Guidelines
The type of ports enabled for autonegotiation are 802.3u for 10/100 Mbps ports or 802.3z for gigabit
Ethernet ports.
Flow control on gigabit Ethernet ports is enabled or disabled as part of autonegotiation. If
autonegotiation is set to off, flow control is disabled. When autonegotiation is turned on, flow control is
enabled.
Example
The following command configures the switch to autonegotiate for slot 1, ports 2 and 4 on a modular
switch:
configure ports 1:2, 1:4 auto on
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
296
ExtremeWare XOS 11.3 Command Reference