Configure Log Target Format - Extreme Networks ExtremeWare XOS Command Reference Manual

configure log target format

configure log target [console | memory-buffer | nvram | session | syslog
[all | <ipaddress> | <ipPort>] {vr <vr_name>} {local0 ... local7}]]
format [timestamp [seconds | hundredths | none]
| date [dd-mm-yyyy | dd-Mmm-yyyy | mm-dd-yyyy | Mmm-dd | yyyy-mm-dd | none]
| severity
| event-name [component | condition | none | subcomponent]
| host-name
| priority
| process-name
| process-slot
| source-line
Description
Configures the formats of the displayed message, on a per-target basis.
Syntax Description
console
memory-buffer
nvram
session
syslog
all
ipaddress
ipPort
vr_name
local0 ... local7
timestamp
date
severity
event-name
host-name
priority
process-name
process-slot
source-line
ExtremeWare XOS 11.3 Command Reference
Specifies the console display.
Specifies the switch memory buffer.
Specifies the switch NVRAM.
Specifies the current session (including console display).
Specifies a syslog target.
Specifies all remote syslog servers.
Specifies the syslog IP address.
Specifies the UDP port number for the syslog target.
Specifies the virtual router that can reach the server IP address.
NOTE: The BlackDiamond 8800 family of switches and the Summit X450
switch do not support user-created VRs.
Specifies the local syslog facility.
Specifies a timestamp formatted to display seconds, hundredths, or none.
Specifies a date formatted as specified, or none.
Specifies whether to include the severity.
Specifies how detailed the event description will be. Choose from none,
component, subcomponent, or condition.
Specifies whether to include the syslog host name.
Specifies whether to include the priority.
Specifies whether to include the internal process name.
Specifies which slot number the message was generated.
NOTE: This parameter is available only on modular switches.
Specifies whether to include the source file name and line number.
configure log target format
473