Enable Cli-Config-Logging - Extreme Networks ExtremeWare XOS Command Reference Manual

enable cli-config-logging

enable cli-config-logging
enable cli-config-logging
Description
Enables the logging of CLI configuration commands to the Syslog for auditing purposes.
Syntax Description
This command has no arguments or variables.
Default
Disabled.
Usage Guidelines
ExtremeWare XOS allows you to record all configuration changes and their sources that are made using
the CLI by way of Telnet or the local console. The changes are logged to the system log. Each log entry
includes the user account name that performed the changes and the source IP address of the client (if
Telnet was used). Configuration logging applies only to commands that result in a configuration
change.
To view the status of configuration logging on the switch, use the command. The
show management
command displays information about the switch including the enable/disable state
show management
for configuration logging.
Example
The following command enables the logging of CLI configuration commands to the Syslog:
enable cli-config-logging
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
517
ExtremeWare XOS 11.3 Command Reference