Extreme Networks ExtremeWare XOS Command Reference Manual page 358

Commands for Configuring Slots and Ports on a Switch
This status information may be useful for your technical support representative if you have a network
problem.
The parameter is used to provided more specific port information. The data is called out with
detail
written explanations versus displayed in a table format.
The detailed output displays a link filter counter. The link filter counter is calculated at the middle layer
on receiving an event. The link filter up indicates the number of link transitions from down to up at the
middle layer filter.
Example
The following command displays port system-related information:
show port 3:1 information
Following is sample output from this command:
QB_Mariner.4 > show port 3:1 info
Port
================================================================================
3:1
================================================================================
Flags : a - Load Sharing Algorithm address-based, D - Port Disabled,
e - Extreme Discovery Protocol Enabled, E - Port Enabled,
f - Flooding Enabled, g - Egress TOS Enabled, j - Jumbo Frame Enabled,
l - Load Sharing Enabled, m - MACLearning Enabled,
n - Ingress TOS Enabled, o - Dot1p Replacement Enabled,
P - Software redundant port(Primary),
q - Background QOS Monitoring Enabled, R - Software redundant port(Redunda
nt),
s - diffserv Replacement Enabled,
v - Vman Enabled, f - Unicast Flooding Enabled
M - Multicast Flooding Enabled, B - Broadcast Flooding Enabled
NOTE
The BlackDiamond 10K switch has an additional flag: p - Load Sharing Algorithm, port-based.
BlackDiamond 8800 family of switches and the Summit X450 switch only. The following command
displays more specific information for slot 3, port 1 on a BlackDiamond 8810 switch:
show ports 3:1 information detail
Following is sample output from this command:
Port: 3:1
Virtual-router: VR-Default
Type:
Random Early drop:
Admin state:
Link State:
Link Counter: Up
VLAN cfg:
358
Diag Flags Link
State
P Em------e-- ready
UTP
Disabled
Enabled with
Active, 1 Gbps, full-duplex
1 time(s)
Link Num Num Num
UPS STP VLAN Proto
0 0 1 1
auto-speed sensing auto-duplex
ExtremeWare XOS 11.3 Command Reference
Jumbo QOS Load
Size profile Master
9216