Unconfigure Diffserv - Extreme Networks ExtremeWare XOS Command Reference Manual

unconfigure diffserv

unconfigure diffserv [examination | replacement]
Description
Uses the default DiffServ examination code point or uses the default DiffServ replacement mapping.
Syntax Description
examination
replacement
Default
N/A.
Usage Guidelines
BlackDiamond 10K switch only. If a port is in more than one virtual router, you cannot use the DiffServ
feature. The default VLAN DiffServ examination mappings apply on ports in more than one VR. If you
attempt to configure DiffServ information on a port that is in more than one virtual router, the system
returns the following message:
Warning: Port belongs to more than one VR. Port properties related to diff serv and
code replacement will not take effect.
Example
The following command removes DiffServ code point examination from ports 5:5-5:8 on a modular
switch:
unconfigure diffserv examination
History
This command was first available in ExtremeWare XOS 11.0.
Platform Availability
This command is available on all platforms.
ExtremeWare XOS 11.3 Command Reference
Specifies to unconfigure the DiffServ examination point.
Specifies to unconfigure the DiffServ replacement mapping.
unconfigure diffserv
727