Enable Snmp Traps - Extreme Networks ExtremeWare XOS Command Reference Manual

Commands for Managing the Switch

enable snmp traps

enable snmp traps
Description
Turns on SNMP trap support.
Syntax Description
This command has no arguments or variables.
Default
Enabled.
Usage Guidelines
An authorized trap receiver can be one or more network management stations on your network. The
switch sends SNMP traps to all trap receivers.
To view if SNMP traps are being sent from the switch, use the command. The
show management show
command displays information about the switch including the enabled/disabled state of
management
SNMP traps being sent.
Example
The following command enables SNMP trap support on the switch:
enable snmp traps
History
This command was first available in ExtremeWare XOS 10.1.
Platform Availability
This command is available on all platforms.
174
ExtremeWare XOS 11.3 Command Reference