Commands for Configuring Slots and Ports on a Switch
show mirroring
show mirroring
Description
Displays the port-mirroring configuration on the switch.
Syntax Description
This command has no arguments or variables.
Default
N/A.
Usage Guidelines
You must enable mirroring on the switch prior to configuring mirroring, and you must configure
mirroring to display mirroring statistics. Use the
command to enable
enable mirroring to port
mirroring and the
to configure mirroring.
configure mirroring add
You can use this command to display mirroring statistics and determine if mirroring is enabled or
disabled on the switch.
To view the status of port-mirroring on the switch, use the
command. The
show mirroring
show
command displays information about the enable/disable state for port-mirroring.
mirroring
Example
The following command displays switch mirroring statistics:
show mirroring
Following is sample output from this command:
Mirror port: 1:5 is up tagged
Number of Mirroring filters: 1
Mirror Port configuration:
Port number 2:1 in
all vlans
History
This command was first available in ExtremeWare XOS 10.1.
216
ExtremeWare XOS 11.0 Command Reference Guide