Monitoring Dhcp Local Server Configuration; Table 114: Show Ip Dhcp-Local Auth Output Fields - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - BROADBAND ACCESS CONFIGURATION GUIDE 2010-10-12 Configuration Manual

JunosE 11.3.x Broadband Access Configuration Guide
Related
Documentation

Monitoring DHCP Local Server Configuration

Purpose
Action
Meaning
552

Table 114: show ip dhcp-local auth Output Fields

Field Name
User-Prefix
Domain
Password
Virtual Router
Circuit Type
Circuit ID
MAC Address
Option 82
RADIUS DHCP Options
auth requests
auth request failures
auth grants
auth denies
show ip dhcp-local auth
Display the DHCP local server's configuration information.
To display configuration settings for DHCP local server:
host1#show ip dhcp-local
*****************************************
DHCP Local Server Configuration
Mode: Standalone
SNMP Traps Enabled - no
Unique Client IDs - enabled
Table 115 on page 553 lists the show ip dhcp-local command output fields.
Field Description
Client's user prefix
Client's domain
Password used to authenticate client
Client's virtual router; excluded or included
Client's circuit type; excluded or included
Client's circuit ID; excluded or included
Client's MAC address; excluded or included
Status of client's option 82 field; excluded or included
Status of the DHCP options returned from the RADIUS server;
excluded or included
Number of authorization requests received by this DHCP local server
Number of authorization requests that have failed
Number of authorization requests that have been granted
Number of authorization requests that have been denied
Copyright © 2010, Juniper Networks, Inc.