Open Ipv - 3Com S7906E Command Reference Manual

Connected to 192.168.1.50.
220 FTP service ready.
User(192.168.1.50:(none)):aa
331 Password required for aa.
Password:
230 User logged in.
[ftp]

open ipv6

Syntax
open ipv6 server-address [ service-port ] [ -i interface-type interface-number ]
View
FTP client view
Default Level
3: Manage level
Parameters
server-address: IP address or host name of the remote FTP server.
service-port: Port number of the remote FTP server, in the range 0 to 65535. The default value is 21.
-i interface-type interface-number: Specifies the egress interface by its type and number. This
parameter can be used only in case that the FTP server address is a link local address and the specified
egress interface must have a link local address (For the configuration of link local addresses, see IPv6
Basics in the IP Services Volume).
Description
Use the open ipv6 command to log in to the IPv6 FTP server in FTP client view.
At login, you will be asked to enter the username and password for accessing the FTP server. If your
input is correct, the login succeeds; otherwise, it fails.
Related commands: close.
Examples
# Log in to the FTP server (with IPv6 address 3000::200) in FTP client view.
<Sysname> ftp
[ftp] open ipv6 3000::200
Trying 3000::200 ...
Press CTRL+K to abort
Connected to 3000::200.
220 Welcome!
User(3000::200:(none)): MY_NAME
331 Please specify the password.
Password:
230 Login successful.
2-20