Tftp Client Source - 3Com S7906E Command Reference Manual

source-filename: Source file name.
destination-filename: Destination file name.
get: Downloads a file in normal mode.
put: Uploads a file.
sget: Downloads a file in secure mode.
source: Configures parameters for source address binding.
interface interface-type interface-number: Specifies the source interface by its type and number.
The primary IP address configured on the source interface is the source IP address of the packets
sent by TFTP. If no primary IP address is configured on the source interface, the transmission fails.
ip source-ip-address: Specifies the source IP address for the current TFTP client to transmit
packets. This source address must be an IP address that has been configured on the device.
Description
Use the tftp command to upload files from the local device to a TFTP server or download files from the
TFTP server to the local device.
If no destination file name is specified, the saved file uses the source file name.
The priority of the source address specified with this command is higher than that specified with the
tftp client source command. If you use the tftp client source command to specify the source
address first and then with the tftp command, the latter one is adopted.
This command applies to IPv4 networks.
Related commands: tftp client source.
Examples
# Download the config.cfg file from the TFTP server with the IP address of 192.168.0.98 and save it as
config.bak. Specify the source IP address to be 192.168.0.92.
<Sysname> tftp 192.168.0.98 get config.cfg config.bak source ip 192.168.0.92
...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait....
TFTP: 372800 bytes received in 1 second(s)
File downloaded successfully.
# Upload the config.cfg file from the local device to the default path of the TFTP server with the IP
address of 192.168.0.98 and save it as config.bak. Specify the source IP interface to be Vlan-interface
1.
<Sysname> tftp 192.168.0.98 put config.cfg config.bak source interface Vlan-interface 1
File will be transferred in binary mode
Sending file to remote TFTP server. Please wait...
TFTP:
File uploaded successfully.

tftp client source

Syntax
tftp client source { interface interface-type interface-number | ip source-ip-address }
345600 bytes sent in 1 second(s).
3-3