Apn-Profile Apply; Attach-Format Imsi-Sn Split - H3C MSR810 Command Reference Manual

Related commands

apn-profile apply

apn-profile apply
Use apn-profile apply to specify a 4G modem profile for an interface.
Use undo apn-profile apply to restore the default.
Syntax
apn-profile apply profile-name [ backup profile-name ]
undo apn-profile apply
Default
No 4G modem profiles are specified for an interface.
Views
Eth-channel interface view
Predefined user roles
network-admin
Parameters
profile-name: Specifies a primary 4G modem profile name.
backup profile-name: Specifies a backup 4G modem profile name.
Usage guidelines
After you specify a 4G modem profile for a 4G modem, the 4G modem uses the settings in the profile
to negotiate with the service provider's device.
The primary profile always has priority over the backup profile. For each dialup connection
establishment, the 4G modem uses the backup profile only when it has failed to dial up using the
primary profile.
This command takes effect only on dialup connections initiated after the command is configured. It
does not take effect on a dialup connection that has been established.
Examples
# Specify primary 4G modem profile test and backup 4G modem profile bktest for Eth-channel
interface 2/4/0:0.
<Sysname> system-view
[Sysname] interface eth-channel 2/4/0:0
[Sysname-Eth-channel2/4/0:0] apn-profile apply test backup bktest
Related commands
apn-profile

attach-format imsi-sn split

Use attach-format imsi-sn split to specify a separator for the IMSI/SN binding authentication
information.
Use undo attach-format imsi-sn split to restore the default.
Syntax
attach-format imsi-sn split splitchart
272