Supplying Power To A Terminal Through Poe - H3C MSR810 Installation Manual

Figure 19 Installing a GPS antenna

Supplying power to a terminal through PoE

Only the RT-MSR810-10-PoE router supports PoE. To supply power to a terminal, the terminal
must support PoE.
To supply power to a terminal through PoE:
Connect one end of the cable to an Ethernet port on the router.
1.
Connect the other end of the cable to the Ethernet port on a terminal.
2.
Examine the port LEDs on the router. For more information about the LEDs, see
3.
description."
21
"LED