Table of Contents
Advertisement
Gigabit Ethernet Connector (3)
The RJ45 Gigabit Ethernet (GbE) Connector provides 10/100/10000 Base-T Ethernet
connectivity between the COM Express Module and the shelf base fabric. The GbE
Connectors should be used to connect peripheral equipment to the 3011 Module; the
Chassis's Ethernet connector should be used to establish a wired network connection.
USB Connectors (4)
The 3011's USB Connectors are Type-A, USB 3.0 ports which provide connections for
peripheral equipment and devices (i.e., USB keyboard, USB Mouse, USB adapters).
DisplayPort Connector (5)
The Display Port Connector is a high resolution, digital interface connector that supports
high-definition video and audio.
CAUTION
Do not place tension on a cable that is attached to the DisplayPort Connector; doing so
may damage the connector.
Rev. C0
April 2020
mA-3011 AXIe Embedded Host Module Operation Guide
Chapter 2 Controls and Connectors
Controls and Connectors
Page 2-3
Advertisement
Table of Contents
