Trace & Table Display; Drift Measurement - Viavi T-BERD/MTS- 2000V2 User Manual

Chapter 1 Optical Spectrum Measurement
Trace & Table display
Trace & Table display

Drift measurement

T-BERD/MTS-2000V2, 4000V2, 5800V2 • OCC-4056C • User Manual 2019.04
34
The Trace & Table display is a combination of the trace only and table
only displays.
Fig. 18 Example of Delta Power measurement
For explanations about the trace functions please see
page 21, for explanations about the table functions please see
display" on page
29.
The OCC-4056C modules provide a Drift measurement application to
perform multiple measurements and display the recorded results in a
graphical format (trace) over the time.
This can be used to monitor the drift of power and wavelength of optical
systems or components. This is important to measure the drift of non
temperature stabilized transmitter in CWDM networks.
NOTE
A Drift measurement can only be done at predefined wavelengths or
frequencies, for this reason a reference Grid needs to be defined and
the Channel Detection parameter is set to Grid.
"Result display" on
"Table