Subaru IMPREZA GD 2007 Series Manual page 3815

asieps_tobira_IM_US.book 50 ページ ２０１２年１月１７日 火曜日 午後３時４８分
EXTERIOR/INTERIOR TRIM
21.Upper Inner Trim
A: REMOVAL
1) Remove the lower inner trim. <Ref. to EI-51, RE-
MOVAL, Lower Inner Trim.>
2) Remove the front molding (A).
3) Remove the front pillar upper trim (B).
4) Detach the front seat belt shoulder anchor, then
remove the center pillar upper trim (C).
(A)
(B)
(D) Clip
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be sure to securely hook claws of inner trim
panel to body flange.
NOTE:
When installing the center pillar upper trim and the
front pillar upper trim, be sure to set the front mold-
ing as shown in figure.
(A)
(D)
(F)
(A) Outside
(B) Inner side
(C) Molding
(D) Weather strip
(E) Trim
(F) Body
Upper Inner Trim
(C)
: (D)
EI-00070
(B)
(C)
(E)
EI-00071
EI-50