CHARGING (2UZ−FE)
−
(d)
Align the pins of the brush holder with the holes of the rear
seal plate, and install the rear seal plate.
B16360
5.
INSTALL REAR END COVER
(a)
Install the terminal insulator.
NOTICE:
Be careful of the terminal insulator installation direction.
B16359
(b)
Install the end cover with the 3 nuts.
Torque: 4.6 N·m (47 kgf·cm, 41 in.·lbf)
6.
CHECK THAT ROTOR ROTATES SMOOTHLY
B16513
GENERATOR (Towing Package Spec.)
CH−27