Toyota Tundra 2005 Service - Repair - Maintenance page 2219

SST
CHARGING (2UZ−FE)
REPLACEMENT
1. REPLACE FRONT BEARING
(a) Remove the 4 screws, bearing retainer and bearing.
B16375
(b) Using SST and a hammer, tap out the bearing.
SST
SST
B16518
(c) Using SST and a press, press in a new bearing.
SST
(d) Install the bearing retainer with the 4 screws.
Torque: 2.6 N·m (27 kgf·cm, 23 in.·lbf)
B16515
2. REPLACE REAR BEARING
(a) Using SST, remove the bearing cover (outside) and bear-
ing.
SST
SST
NOTICE:
Be careful not to damage the fan.
(b) Remove the bearing cover (inside).
B12270
(c) Place the bearing cover (inside) on the rotor.
B12271
− GENERATOR (Towing Package Spec.)
09950−60010 (09951−00250), 09950−70010
(09951−07100)
09950−60010 (09951−00470), 09950−70010
(09951−07100)
09820−00021
CH−23
CH0LV−01