Toyota Tundra 2005 Service - Repair - Maintenance page 2231

CLUTCH − CLUTCH MASTER CYLINDER
DISASSEMBLY
1. REMOVE RESERVOIR TANK
(a) Using a pin punch and hammer, drive out the slotted
spring pin.
(b) Remove the reservoir and grommet.
2. REMOVE CLEVIS AND BOOT
(a) Loosen the lock nut to remove the clevis and remove the
lock nut.
D04400 (b) Remove the boot.
3. REMOVE PUSH ROD
(a) While pushing the push rod, remove the snap ring using
snap ring pliers.
(b) Remove the push rod and washer.
4. REMOVE PISTON WITH SPRING
Q02470
CL−7
CL02A−03