Toyota Tundra 2005 Service - Repair - Maintenance page 2227

25 mm (0.98 in.) or more
Full Stroke
End Position
Clutch
Start Switch
CLUTCH
(d)
Release
Point
If the distance is not as specified, perform the following opera-
tions.
CL0512
6.
(a)
(b)
Q02465
− CLUTCH PEDAL
Gradually depress the clutch pedal and measure the
stroke from where the gear noise stops (release point) up
to the full stroke end position.
Standard distance:
25 mm (0.98 in.) or more
(From pedal stroke end position to release point)
S
Check pedal height.
S
Check push rod play and pedal freeplay.
S
Bleed clutch line.
S
Check clutch cover and disc.
CHECK CLUTCH START SYSTEM
Check that the engine does not start when the clutch ped-
al is released.
Check that the engine starts when the clutch pedal is fully
depressed.
CL−3