Toyota Tundra 2005 Service - Repair - Maintenance page 2193

CH−12
CHARGING (1GR−FE)
5.
(a)
B17648
(b)
SST
B17649
6.
(a)
SST
(b)
B17650
− GENERATOR
REMOVE GENERATOR DRIVE END FRAME BEARING
Remove the 4 screws and retainer plate.
Using SST, tap out the bearing.
SST 09950−60010 (09951−00250), 09950−70010
(09951−07100)
INSTALL GENERATOR DRIVE END FRAME BEARING
Using SST and a press, press in a new bearing.
SST 09950−60010 (09951−00470), 09950−70010
(09951−07100)
Install the retainer plate with the 4 screws.
Torque: 2.6 N m (27 kgf cm, 23 in. lbf)