Mac Learning-Limit Reset - Dell S4810 Reference Manual

Parameters
log
shutdown-both
shutdown-
offending
shutdown-
original
Defaults none
Command INTERFACE (conf-if-interface-slot/port)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.8.1.0
Version 7.5.1.0
Usage This command is supported on physical interfaces, static LAGs, and LACP LAGs.
Information
Related show mac learning-limit
Commands

mac learning-limit reset

Reset the MAC address learning-limit error-disabled state.
S4810
Syntax
mac learning-limit reset
Defaults none
Command
•
Modes
•
1046
Enter the keyword log to generate a syslog message on a
station move violation.
Enter the keyword shutdown to shut down both the original
and offending interface and generate a syslog message.
Enter the keywords shutdown-offending to shut down
the offending interface and generate a syslog message.
Enter the keywords shutdown-original to shut down the
original interface and generate a syslog message.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— displays details of the mac learning-limit.
EXEC
EXEC Privilege
Layer 2