Dell C9000 Series Reference Manual page 749

Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.3.1.0
7.7.1.0
Usage Information Use the show diag command to view a summary of diagnostic information presented
for each switch CPU. CPU diagnostic results are presented in the following order:
Control Processor (CP), line-card processor 0 (LP0), line-card processor 1 (LP1), line-
card processor 2 (LP2), and Route Processor (RP).
Example: While
Dell# show diag linecard 0 detail
offline diagnostics
Diag status of linecard member 0:
---------------------------------
are running on a
line card
Dell# show diag linecard 0 summary
Diag status of linecard member 0:
---------------------------------
Example: After
Dell#show file TestReport-LP-0.txt
offline diagnostics
Called with cpu = 3 slotID = 0
are run on a line
card
Description
Introduced on the C9010 and C1048P.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced the verbose option.
Introduced on the S-Series.
linecard is currently offline.
linecard level0 diag issued at Wed Jan 08, 2014 04:39:58 AM.
Current diag status
Last notification received at Wed Jan 08, 2014 04:40:05 AM
Last notification message
linecard is currently offline.
linecard level0 diag issued at Wed Jan 08, 2014 04:39:57 AM.
Current diag status
Last notification received at Wed Jan 08, 2014 04:40:04 AM
Last notification message
DELL DIAGNOSTICS-C9000-CP00
CpuType
PPID
PPID Rev
Service Tag
Part Number
Part Number Revision
: Card diags are in progress.
: Testing ... rtcTest
: Card diags are in progress.
: Testing ... rtcTest
[0]
-- LM
-- CN0CYFF2779314520008
-- X00
-- 11VRG02
-- 0CYFF2
-- X00
Debugging and Diagnostics 749