Show Diag Testcase - Dell C9000 Series Reference Manual

-------------------------------------------------------------------

show diag testcase

Display the offline diagnostic tests available for the CPUs at each level.
C9000 Series
Syntax
show diag testcase {cp |linecard | pe pe-id [alllevels | level0 |
level1 | level2]}
From a PE console, use show diag testcase {stack-unit unit-number
[alllevels | interactive | level0 | level1 | level2]}
Parameters
cp unit-id
pe
stack-unit unit-
number
linecard slot-id
alllevels
interactive
level0
level1
stack-unit Member
Enter the cp unit-id parameters to display only the offline
diagnostic tests available on the Control Processor CPU. The
Control Processor CPU ID is 0.
Enter thepe pe-id parameters to display only the offline
diagnostic test available on the port extender (PE).
Enter thestack-unit unit number parameters to display
only the offline diagnostic test available on the specified stack
unit. The range is from 0 to 7.
Enter the linecard slot-id parameters to display only the
offline diagnostic tests available for a specified line card. The
range of line-card CPU IDs is from 0 to 11. Each line-card CPU
processes packets on the corresponding switch line card; for
example, line-card CPU 1 processes packets on line card 1.
Enter the keyword alllevels to display the complete set of
offline diagnostic tests.
Enter the keyword interactive to display interactive diag
testcases.
Enter the keyword level0 to display only the Level 0 diagnostic
tests. Level 0 diagnostics check for the presence of various
components and perform essential path verifications. In
addition, they verify the identification registers of the
components on the board.
Enter the keyword level1 to display only the Level 1 diagnostic
tests. Level 1 diagnostics is a smaller set of diagnostic tests with
support for automatic partitioning. They perform status/self test
for all the components on the board and test their registers for
appropriate values. In addition, they perform extensive tests on
memory devices (for example, SDRAM, flash, NVRAM, EEPROM,
7: Not present.
Debugging and Diagnostics 756