Usage Information PFC and ETS are enabled by default on the interfaces when DCB is globally enabled
(refer to dcb enable). In some network topology, you may want to disable PFC on an
interface and apply link level flow control; Similarly you may want to disable ETS on an
interface and apply QoS bandwidth configurations.
Limitations
•
•
•
•
"dcb-map" CLI on interface is mutually exclusive to "no dcb ets enable" and
"no dcb pfc enable".
"pfc priority" CLI is mutually exclusive to "no dcb pfc enable" command.
Deprecated CLI "dcb-policy input" and "no dcb pfc enable" cannot
coexist at interface level.
Deprecated CLI "dcb-policy output" and "no dcb ets enable" cannot
coexist at interface level.
Data Center Bridging (DCB)
742