Show Hardware Ip - Dell C9000 Series Reference Manual

Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
-----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
-----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
-----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
-----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
-----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
-----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
-----
Maximum Shared Limit: 4637
Default Packet Buffer allocate for the Queue: 8
Used Packet Buffer: 0
-----
Related
clear hardware system-flow
Commands
show system

show hardware ip

Display Layer 3 ACL or QoS data for a line card and port pipe.
C9000 Series
Syntax
show hardware ip {eg-acl | in-acl | qos} linecard slot-id | pe pe-id
stack-unit unit-number port-set port-pipe
Parameters
eg-acl
in-acl
qos
linecardslot-id
Buffer Stats for Interface PeGi 10/1/1 Queue 5 -----
Buffer Stats for Interface PeGi 10/1/1 Queue 6 -----
Buffer Stats for Interface PeGi 10/1/1 Queue 7 -----
Buffer Stats for Interface PeGi 10/1/1 Queue 8 -----
Buffer Stats for Interface PeGi 10/1/1 Queue 9 -----
Buffer Stats for Interface PeGi 10/1/1 Queue 10 -----
Buffer Stats for Interface PeGi 10/1/1 Queue 11 -----
Buffer Stats for Interface PeGi 10/1/1 Queue 12 ----
— clears the statistics from selected hardware components.
— displays the current status of all the stack members or a specific member.
Enter the keyword eg-acl to display Layer 3 egress acl data.
Enter the keyword in-acl to display Layer 3 ingress acl data.
Enter the keyword qos to display QoS data.
Enter the linecard slot-id parameters to specify a line card. The
range of slot IDs is from 0 to 11.
Debugging and Diagnostics 788