Ip Helper-Address (Global Configuration); Ip Helper-Address (Interface Configuration); Ip Helper Enable; Show Ip Helper-Address - Dell PowerConnect M6348 Cli Reference Manual

IP Helper
Command
clear ip helper statistics
ip helper-address (global
configuration)
ip helper-address (interface
configuration)

ip helper enable

show ip helper-address

show ip helper statistics

*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.

IP Routing

Command
encapsulation

ip address

ip mtu

ip netdirbcast

ip route

ip route default

ip route distance

ip routing

routing

show ip brief

show ip interface

show ip protocols

show ip route

show ip route preferences

Description
Resets (to 0) the statistics displayed in show ip helper
statistics.
Configures the relay of certain UDP broadcast packets
received on any interface.
Configures the relay of certain UDP broadcast packets
received on a specific interface.
Enables relay of UDP packets.
Displays the IP helper address configuration.
Displays the number of DHCP and other UDP packets
processed and relayed by the UDP relay agent.
Description
Configures the link layer encapsulation type for the packet. IC
Configures an IP address on an interface.
Sets the IP Maximum Transmission Unit (MTU) on a
routing interface.
nables the forwarding of network-directed broadcasts.
E
Configures a static route. Use the no form of the command
to delete the static route.
Configures the default route. Use the no form of the
command to delete the default route.
Sets the default distance (preference) for static routes.
Globally enables IPv4 routing on the router.
Enables IPv4 and IPv6 routing for an interface.
Displays all the summary information of the IP .
Displays all pertinent information about the IP interface.
Displays the parameters and current state of the active
routing protocols.
Displays the routing table.
Displays detailed information about the route preferences. PE
Mode*
PE
GC
IC
GC
PE
PE
Mode*
IC
IC
IC
GC
GC
GC
GC
IC
PE
PE
PE
PE
77