Show Ip Protocols - Dell PowerConnect 8024 Cli Reference Manual

Netdir Multi
Interface
---------- --------------- --------------- -------- --------
vlan1
vlan2
loopback2
console#show ip interface vlan 15
Primary IP Address.............................
192.168.10.10/255.255.255.0
Secondary IP Address(es).......................
192.168.20.20/255.255.255.0
Routing Mode................................... Disable
Administrative Mode............................ Disable
Forward Net Directed Broadcasts................ Disable
Proxy ARP...................................... Enable
Local Proxy ARP................................ Disable
Active State................................... Inactive
Link Speed Data Rate........................... Inactive
MAC Address.................................... 00:00:00:01:00:02
Encapsulation Type............................. Ethernet
IP MTU......................................... 1500

show ip protocols

Use the show ip protocols command in Privileged EXEC mode to display the parameters and
current state of the active routing protocols.
Syntax
show ip protocols
Default Configuration
This command has no default configuration.
624
IP Routing Commands
IP Address
192.168.10.10
0.0.0.0
0.0.0.0
IP Mask
255.255.255.0
0.0.0.0
0.0.0.0
Bcast CastFwd
Disable Disable
Enable Disable
Disable Disable