Show Ip Protocols - Dell PowerConnect 6024F Command Line Interface Reference Manual

Command line interface (cli) guide (.htm)
Hide thumbs Also See for PowerConnect 6024F:
Table of Contents

Advertisement

The following example displays the routing table for IP address 192.168.1.0 with the address mask
255.255.255.0 and matching the prefix created from the IP address and address mask.
Console> show ip route address 192.168.1.0 255.255.255.0 longer-
prefixes
Codes: C - connected, S - static, R - RIP, O - OSPF,
E - OSPF external
S 192.168.1.0/24 [5/3] via 10.0.2.1, 17:12:19, Ethernet g1
S 192.168.1.1/32 [5/3] via 10.0.3.1, 19:51:18, Ethernet g1
The following table describes the significant fields shown in the display:
Field
Description
O
Indicates protocol that derived the route.
10.8.1.0/24
Indicates the remote network address.
[30/2000]
The first number in the brackets is the administrative distance of the information
source; the second number is the metric for the route.
via 10.0.1.2
Specifies the address of the next router to the remote network.
00:39:08
Specifies the last time the route was updated, in hours:minutes:seconds.
Ethernet 1
Specifies the interface through which the specified network can be reached.

show ip protocols

The show ip protocols privileged EXEC command displays the parameters and current state of the
active routing protocols.
Syntax
show ip protocols
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
IP Routing Protocol-Independent Commands
193

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect 6024

Table of Contents