Show Ip Protocols - Dell Z9500 Reference Manual

summary
static
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.5.1.0
6.1.1.0
Example
Dell#show ip management-route
Destination
-----------
10.1.2.0/24
172.16.1.0/24
Dell#

show ip protocols

View information on all routing protocols enabled and active on the switch.
Z9500
Syntax
show ip protocols
Command
•
Modes
•
944
(OPTIONAL) Enter the keyword summary to view a table
listing the number of active and non-active routes and their
sources.
(OPTIONAL) Enter the keyword static to view non-active
routes also.
EXEC
EXEC Privilege
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
Gateway
-------
ManagementEthernet 0/0
10.1.2.4
EXEC
EXEC Privilege
State
-----
Connected
Active
IPv4 Routing