Show Ip Protocols - Dell Networking 2024 Reference Manual

Syntax
show ip policy
map-name —The name of a specific route map.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
console#show ip policy
Interface
Gi1/0/24

show ip protocols

Use the show ip protocols command in Privileged EXEC mode to display a
summary of the configuration and status for each unicast routing protocol.
The command lists all supported routing protocols, regardless of whether they
are currently configured or enabled.
Syntax
show ip protocols
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
1066
IP Routing Commands
map-name
Route map
pbr-rmap