sfm sfm-unit-
num
system
Defaults
none
Command Modes
•
•
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
•
cpu i2c statistics: Displays active i2c-address
statistics.
•
cpu management statistics: Displays management
port counters.
•
cpu sata-interface statistics: Displays sata-
interface error counter-statistics.
Enter the keyword sfm with a Switch Fabric Module (SFM) unit
number and a command option to display hardware statistics
from the specified SFM on the switch. The range of SFM unit
numbers is from 0 to 5. The command options are:
•
buffer {total-buffer | unit unit-num {port
port-num | total-buffer}: Displays buffer statistics
from the total SFM buffer or from a specified SFM unit. The
range of SFM unit ID numbers is from 0 to 5. The range of
SFM unit ports is from 1 to 4096.
•
counters: Displays the counters for SFM traffic to
troubleshoot an error condition.
•
details: Displays more detailed information on control-
plane and protocol control packet statistics.
•
drops: Displays the number of internal drops on the
specified SFM unit.
•
port-stats: Displays status about why an SFM port is not
brought up to register level.
•
register: Displays the internal registers for each switch
fabric.
•
table-dump: Displays the tables from the bShell.
Enter the keyword system to display the current status of the
system hardware. The command options are:
•
system {bp-link-state}: Displays the statistics related
to the backplane link state bit map.
•
system {bp-link-state linKId range}: Displays the
status of the specified link. LinKId range for the system is
from 0 to 155.
EXEC
EXEC Privilege
Debugging and Diagnostics
773