Show Hardware Buffer - Dell C9000 Series Reference Manual

HOL DROPS on COS2
HOL DROPS on COS3
HOL DROPS on COS4
HOL DROPS on COS5
Example
Dell>show hardware forwarding-table mode
(Forwarding-table
mode)
Mode
L2 MAC Entries
L3 Host Entries
L3 Route Entries
Related
clear hardware system-flow
Commands
components.
show system
member.

show hardware buffer

Display buffer statistics for a specified interface.
C9000 Series
Syntax
show hardware {interface interface [buffer-info | priority-group [group
number | all] | queue [queue number | all]]
Parameters
interface interface
buffer-info
Current Settings
: Default
: 160K
: 144K
: 16K
— clears the statistics from selected hardware
— displays the current status of all the stack members or a specific
Enter the keyword interface then type one of the following interface
types and slot/port or number information:
• For a 1–Gigabit Ethernet interface, enter the keyword
gigabitethernet.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
• For a port extender (PE) Gigabit Ethernet interface, enter the
keyword peGigabitEthernet then the pe-id, stack-unit unit
number, and port-id. The pe-id range is 0–255; the stack unit
number range is 0–7; and the port-ID range is 0 –47.
NOTE: The peGigE interface option is only available when the
extended bridge is enabled.
Enter the keyword buffer-info to view the total buffer allocated for
the Interface
: 0
: 0
: 0
: 0
Debugging and Diagnostics 786