Show Ipv6 Management-Route; Show Ip Protocols - Dell Force10 Z9000 Reference Manual

-----------
10.1.2.0/24
172.16.1.0/24
FTOS#

show ipv6 management-route

Display the IPv6 static routes configured for the management interface.
C-Series, E-Series, Z-Series, S4810
Syntax show ipv6 management-route [all | connected | summary | static]
Parameters
all
connected
summary
static
Command Modes EXEC Privilege
Command History
Version 9.0.0.0
Version 8.4.1.0
Version 8.3.7.0
Example
FTOS#show ipv6 management-route
IPv6 Destination
----------------
2001:34::0/64
2001:68::0/64
FTOS#

show ip protocols

View information on all routing protocols enabled and active on the switch.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax show ip protocols
-------
ManagementEthernet 0/0
10.1.2.4
(OPTIONAL) Enter the keyword all to view all IP addresses assigned
to all Management interfaces on the switch.
(OPTIONAL) Enter the keyword connected to view only routes
directly connected to the Management interface.
(OPTIONAL) Enter the keyword summary to view a table listing the
number of active and non-active routes and their sources.
(OPTIONAL) Enter the keyword static to view non-active routes
also.
Introduced on the Z9000.
Introduced on the C- and E-Series.
Introduced on the S4810.
Gateway
-------
ManagementEthernet 0/0
2001:34::16
-----
Connected
Active
State
-----
Connected
Active
821