Hardware Commands; Clear Control-Traffic - Dell C9000 Series Reference Manual

Hardware Commands

The hardware commands supported on the switch allow you to display information from a hardware sub-
component or ASIC.

clear control-traffic

Clear control-traffic statistics from the CPU.
C9000 Series
Syntax
clear control—traffic {all | cp—switch | linecard slot-id portset
port-pipe} counters
Parameters
cp-switch
linecard slot-id
portset port-pipe
all
Defaults None.
Command Modes EXEC Privilege
Example
Dell# clear control-traffic cp-switch counters
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.11.1
8.1.1.0
Enter the keyword cp-switch to clear the counters for control
traffic on the control plane.
Enter the slot ID and port pipe to clear the counters for control
traffic on a specified switch line card and port set. The range of
slot IDs is from 0 to 2. The range of port-pipe numbers is: 0 to 2
on line card 0 and 0 to 3 on line cards 1 and 2.
Enter the keyword all to clear control-traffic statistics on the
control plane and all line cards.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the ES-Series.
Debugging and Diagnostics 764